Learn More About The Security System

Harley-Davidson® Security System Operation

Operation:

To arm the system:

When the motorcycle is parked and the ignition key is turned to OFF, the Harley-Davidson® Smart Security System arms automatically within five seconds if no motion is detected. Upon arming, the turn signals will flash twice and the optional siren will chirp twice. While armed, the key icon in the speedometer face will flash every three seconds.

To disarm the system:

With an assigned fob present, the system automatically disarms when the ignition key is turned to IGNITION. When the module disarms, the optional siren will chirp once and the key icon will illuminate for a solid four seconds and then turn off.

Open Today! Sales: 8am-5pm
Call us at: (707) 444-0111

Dealership Info

Phone Numbers:Sales Hours:
  • Tue - Sat8:00 AM - 5:00 PM
  • Mon, SunClosed
Service Hours:
  • Tue - Sat8:00 AM - 4:30 PM
  • Mon, SunClosed
Parts Hours:
  • Tue - Sat8:00 AM - 4:30 AM
  • Mon, SunClosed

Manual Override Process:

In the event of a misplaced or disabled fob, your Harley-Davidson® smart security system can be disarmed by using your five-digit, Personal Identification Number (PIN). Follow each step in the process below carefully.

Note: Do not turn handlebars, straddle seat or lift motorcycle off the jiffy stand. During a PIN disarm, if the smart security system detects motorcycle motion the system will activate the alarm.

Step No. 1
If necessary, verify the current 5-digit PIN.
Step No. 2
Turn Ignition key to IGNITION.
Step No. 3
Quickly (within 2 seconds of turning ignition key) hold both turn signal switches in until confirmation. Key icon flashes at fast rate. In the odometer window, a flashing dash will be followed by four more dashes.
Step No. 4
Enter first digit (a) in the PIN by pressing left turn switch a times.The first digit (a) In the odometer will be the first digit in the PIN.
Step No. 6
Enter second digit (b) in the PIN by pressing left turn switch b times.The second digit (b) In the odometer will be the second digit in the PIN.
Step No. 7
Press right turn switch 1 time. The second digit is stored and the next dash will flash.
Step No. 8
Enter third digit (c) in the PIN by pressing left turn switch c times.The third digit (c) In the odometer will be the third digit in the PIN.
Step No. 9
Press right turn switch 1 time.The third digit is stored and the next dash will flash.
Step No. 10
Enter fourth digit (d) in the PIN by pressing left turn switch d times. The fourth digit (d) In the odometer will be the fourth digit in the PIN.
Step No. 11
Press right turn switch 1 time. The fourth digit is stored and the next dash will flash.
Step No. 12
Enter fifth digit (e) in the PIN by pressing left turn switch e times. The fifth digit (e) in the odometer will be the fifth digit in the PIN.
Step No. 13
Press right turn switch 1 time. The fifth digit is stored. The key icon stops blinking and the Smart Security System is disarmed.

BECOME PART OF THE HARLEY-DAVIDSON® FAMILY

2500 6th St. | Eureka CA 95501
Saved
Saved Vehicles

SAVED VEHICLES

You don't have any saved vehicles!

Look for this link on your favorites:

Save

Once you've saved some vehicles, you can view them here at any time.

Contact
Contact Us

(707) 444-0111

Call Now

2500 6th St. • Eureka, CA 95501

Get Directions

Today's Hours:

Open Today! Sales: 8am-5pm

Open Today! Service: 8am-4:30pm

Open Today! Parts: 8am-4:30am

Redwood Harley-Davidson 40.803297, -124.143649.